How To remove PVA Glue From Wood In Easy Steps

If you’ve just found some PVA glue on your wooden furniture or on your polished wood floor, you’re probably panicking right now about what you can do to resolve the problem. PVA glue can be more tricky to remove than you might imagine, and although there is quite a lot of advice out there about how to get rid of it, if you follow the advice you can find that you might end up doing more harm than good.

The term “PVA” means Polyvinyl Acetates. This form of glue comes in 2 different types – yellow and white. Most people will be very familiar with the white form of the glue which is sometimes called craft glue and is used in schools everywhere. The yellow type is sometimes known as carpenters’ glue.

It is popular with handymen and woodworkers to bond wood pieces together. While wood glue is a vital part of many woodworking and carpentry projects, if you apply too much, it can get everywhere very quickly. If you don’t manage to get it all cleaned up before it dries, it can easily spoil the finish of your finished item.

When PVA glue becomes stuck to wood joints, it may seem that water can remove it, but since PVA becomes waterproof when it dries, the water could end up damaging and warping the wood. If you have some dried PVA glue, how do you begin to rescue your wood? Here, we offer you some useful advice about how to remove PVA glue from wood in the most effective ways possible.

The Hot Water Method

One of the most effective methods of removing PVA glue from wood if it hasn’t yet dried is to use boiling water. While this isn’t an easy method since it requires plenty of effort on your behalf, it definitely works.

What you need:

  • A bucket filled with boiling water
  • A pair of thick rubber gloves
  • A pan scourer (metal)
  • A cloth

Method:

Put on the rubber gloves and then dip the cloth into the boiling water. Dab the cloth onto the area of PVA glue that you wish to remove. Make certain that the water in the bucket is actually boiling or otherwise it won’t work. If you are cleaning floorboards, you need to be very careful when using this method since if you accidentally saturate the boards you can end up with water leaking through or the boards expanding and becoming damaged.

Once the PVA glue area has been dampened, dip the metal pan scourer into the boiling water and use it to scrub in a crossways direction over the patch of glue. Go against the wood grain since this will remove the glue more rapidly. Scrub repeatedly until you see the glue moving. You will need to be as quick as you can as when the water cools down it won’t be able to shift the glue.

In practice, you will usually be able to clean an area roughly 4 feet square before needing to refill the bucket with boiling water. Before refilling the bucket, soak up any excess water and mulched glue from the place you have been working with a dry cloth. Repeat until all the glue is fully removed. You will need to put in plenty of effort when using this method but it will work.

 

The White Spirit Method

If you’re looking for a different, cost effective way to remove PVA glue from wood, you could always try using white spirit. Here are the steps that you need to take:

  • Apply white spirit using a clean cloth in a thin layer onto the surface that you wish to clean.
  • Leave for a few minutes so the white spirit can act on the glue.
  • Using another cloth, soak it in some soapy warm water (using standard dish soap will be adequate). Squeeze any excess water from the cloth and then wipe the glue off the wooden surface using the cloth.
  • Repeat until you see results.
  • Dip a clean cloth into white spirit then rub the cloth onto the PVA glue to remove it.

 

The Hairdryer Method

If you’re facing some hard and dried on PVA glue spoiling the appearance of your wood, you could try the hairdryer method. You will require:

  • A hairdryer
  • A paint scraper

Method:

  • Simply plug your hairdryer into a socket close to the wood with the dried on glue.
  • Switch on the hair dryer, making sure that it’s set to low.
  • Direct the hot air directly on the dry glue for 5 minutes.
  • Touch the glue gently with your fingers. If it hasn’t softened, repeat for 5 minutes more to make sure that it is soft enough to remove.
  • When the glue is soft, use your paint scraper to scrape away the soft glue.
  • Take care that you don’t scratch the wood.
  • Rub away any specks of PVA glue that remain using your fingers.

 

The Sanding Approach

If you need to remove PVA glue from a wooden surface, it is possible to remove it by sanding the surface down carefully. While this can be done without damaging the finish of your floor or wooden item, you will need to use a correct technique to ensure that you don’t make a costly mistake. Always try out the technique you plan to use on a discreet and hidden area first to ensure that you don’t cause any visible damage. This is only an option if the wood that you need to remove the glue from has not been treated. If the wood is treated, you will need to try a different method.

 

The Petroleum Jelly Method

If you have a treated wood surface that has dried on PVA glue, you may be able to use petroleum jelly to remove the glue. Petroleum jelly is safe for use on most kinds of treated wood. Simply apply it onto the patch of glue and leave overnight. It will loosen the bonds with the wood and by the time you return to it the next day, you should be able to clean it off with a cloth relatively easily. You will then need to polish or oil the wood as you would normally to restore its flawless appearance.

 

The Solvent Method

As the majority of wood glues dry clear they can be difficult to locate. You can locate problem areas by using a wet cloth or sponge to rub over the wood’s surface, squeezing gently as you move it. The water darkens the wood’s surface, allowing dry glue patches to appear lighter than the rest of the surface. Once you have found the glue, you have to weaken it. Apply a solvent to suit the glue type which you used. If necessary, read the packaging or discuss the matter with a DIY store associate to get their professional advice.

Apply the solvent onto the area affected and leave in place for around one hour before trying to remove it. While you’re waiting, it will leak into the wood glue, weakening its structure and making it simpler to remove. However, it’s important to wait no longer than an hour or the solvent could leak into the fibers of the wood causing damage. After an hour, use a brass wire brush or steel wool to scrub the stained area using gentle pressure.

Don’t be too vigorous or the surface could easily be damaged. Scrub in the wood grain’s direction to make sure that all of its pores have been cleaned from particles of dried glue. Once you’re finished scrubbing, use a dry, large cloth to rub the area down that you’ve worked on. Using a large but of sandpaper, sand down the area where you removed the dried glue from.

Again, take care to use only gentle pressure since you’re sanding the wood’s top surface and you don’t want to damage it and spoil its appearance. You should have no remaining traces of dried glue now. Finally, use a damp cloth and wipe the wood’s surface, including the bit of wood you worked on. This removes all dust, debris and dirt produced by sanding and scrubbing. The wood will now look flawless and ready to add finishes, paints or stains with no dried PVA glue to worry about.

 

Natural Alternatives

If you would rather avoid using any harsh chemicals on your wood, there are a few natural methods which you can try to remove glue. Try one of these options:

White vinegar – put some white vinegar onto a clean cloth, wring out the cloth and then dab it onto the glue patch. Make sure that you don’t put excessive amounts of vinegar onto the surface. Dab the vinegar in small amounts onto the glue until it softens and loosens. Once it is loose, using your fingers, roll it off the surface gently. This method won’t damage your wood’s finish.

Mayonnaise – mayonnaise contains oil which may soften glue making it simpler to remove. Simply rub a little mayo onto the glue patch using your fingers, leave in place for quarter of an hour and then wipe off both the glue and the mayonnaise away using a clean piece of rag. Should the glue fail to be removed using the mayo, you can apply one more layer.

Orange peel – pop some orange peel onto glue spots and leave them in place to break down the glue for ten minutes. This works because the citric acid in the peel may help break the glue down making it easier to remove. Remove the peel once the 10 minutes are up and using a cloth, wipe the glue away.

 

Other Top Tips For Removing PVA Glue From Wooden Surfaces

If the glue has hardened and is difficult to remove, you could always scrape off any old glue reside using a still-sharp but old razor blade. Make sure to wear protective gloves when doing this. This is a suitable solution if you aren’t worried about damaging the surface that the glue is on, but won’t be any good if you need to keep the surface flawless.

Another possibility is using a steamer such as a wallpaper steamer to remove PVA glue. The steam can enhance the process of removing the glue, especially if it’s tough and hard to get off. This approach will not be appropriate if there is any chance of the wood becoming damaged by the hot steam.

Getting wood on your wooden floor, furniture or joins is never fun, and if having a flawless finish is important, you’re sure to want to make sure that any residue is fully removed, especially if you’re planning on varnishing or painting the wood. The above methods are all effective and can help to make sure that your wooden surface stays looking perfect, even if you do have an accident with the PVA. Whether you prefer using chemicals or more natural methods, one of these options is sure to work for you.